Solhydflow FS

 PRODUCT MIXING

• For each 22.7 kg (50 lbs) bag add 5.0 L of clean potable water into the
SOLHYDFLOW mixing drum.
• Then add the SOLHYDFLOW FS bags, while mixing at full speed with a paddle
mixer attached to a heavy duty 1/2” drill (min. 650 rpm).
• Always add the product to the mixing water.
• Mix completely for a minimum of 2 to 3 minutes until mixture is homogeneous and
lump free.
• Do not add any additional water once the homogeneous mix has been obtained.
• Over wood, cutback and non-porous subfloors the addition of SOLHYDFLOW
EMULSION is required to increase the resiliency of SOLHYDFLOW FS.
• Mix 1.4 L of SOLHYDFLOW EMULSION with 3.8 L of clean potable water for each
bag of SOLHYDFLOW FS.
• Add this mixture into the SOLHYDFLOW mixing drum followed by the addition of
SOLHYDFLOW FS bags and mix as outlined above.
• It is also recommended to use two (2) SOLHYDFLOW mixing drums simultaneously,
mixing one (1) drum while the other is being poured.
• In this manner, we avoid slowing down the pours while respecting the 2 to 3
minutes mixing time.
• SOLHYDFLOW FS can also be pumped affording high productivity and continuous
smooth placement. Contact your local BMQ SOLUTIONS represent